MILK SEPARATION
CAPACITY 5000
LPH
APPLICATION
Separation, Standardization and clarification of hot milk.
ACCESSORIES
& OPTIONALS: All separators are supplied with “standardizing device”
standard accessory. However if the separator is to be used for clarification
duty, “Remixing device” is also available
SPECIFICATIONS
& SCOPE OF SUPPLY .......... MILK COOLING UNIT,
Basis of Design:
Product Capacity 10000 LPH,
Temp Program
35-4
Basis of Design:
Product White Milk Without Additives LPH
Capacity 5000
LPH Homogenization Pr. 200 (for TA 2)
Bar Product
Pressure at Inlet > 3bar Max.
Operating Temp.
85 C Motor Rating / Power consumption valid for ambient temperature 40 Deg C
and altitude below 1000 m.
Utilities
Required (Approx): Cooling water 400 LPH Motor rating 37 kW , 415V, 3 PH, 50 Hz
Actual Power Required 32.7 kW , 415V, 3 PH, 50 Hz
Scope of supply Drive end:
o Whole
crankshaft drive installed in totally closed housing of cast iron
o Splash
lubrication of all moving parts
o Incorporated
oil cooler
o Power
transmission from drive motor to crankshaft via v-belts Wet end:
o One-piece pump
block of forged stainless steel
o Spring-loaded
valves and removable valve seat. Mushroom valves of solid Cobalt carbide
(Stellite) and valve seat made of hardened stainless steel
o Double piston
seal arrangement with in-between chamber o Piston seals in quick change
cartridge for working temperature up to max 85 °C
o Heavy duty
pressure gauge mounted in front panel
o Chromium
plated pistons of hardened stainless steel
o Cooling water
valve/solenoid, 24 V DC
o Pulsation
dampers, in and outlet, heavy duty clamp connections (maximum pressure 20 bar)
Homogenizing head:
o With hydraulic
pressure setting by manually actuated valve, incl. hydraulic unit mounted in
frame, homogenization device with integrated second stage, made of solid Cobalt
carbide (Stellite). Reversible seat and forcer disc for double lifetime.
Electrical equipment:
o A.C. main
motor, 6-poles
o A.C. motor for
hydraulic unit
o Remote on/off
setting of hydraulic unit, 24 V DC
o Emergency
switch and Start/Stop buttons on machine
o Y/D starter
panel integrated in frame Other:
o Galvanized
mild steel frame with stainless steel cladding o Commissioning kit including
tools
o Technical documentation
o Oil filling
for crank house and hydraulic unit o Oil level sight glass and oil temperature
gauge mounted on machine housing
STANDARD EQUIPMENT INCLUDES:
o Basic Machine
as detailed above ......................................................1 No
o Commissioning
kit incl. tools ..............................................................1
Set
o Instruction
manuals in English ..........................................................2
sets
o Oil filling
for hydraulic unit and reduction gear ...................................1 Set
No comments:
Post a Comment