Crystallization Tank
– 25000ltr.
Type
Vertical Cylinder
with welded conical top and bottom, provided with
SS jacket and SS
cladding.
Design Conditions
Pressure Temperature Pressure Test
Shell 95°C
Atmospheric Water Filled
Jacket 110°C 2.5
kg/cm2 (g) 3.5 Kg/cm2(g)
Geometric Capacity
25000 L
Shell
Fabricated out of SS 316L
quality plate.
Jacket
SS304 provide on the
shell covering 90% of the total length of the
shell.
Insulation Outer
insulation
Bottom Flush Valve.
Bottom Flush Valve of
76 mm OD shall be supplied and installed at
the bottom of the
crystalliser.
Cover Conical
bottom and top cover will be welded to the shell. It will be
fabricated out of
SS316 quality material.
Agitator 1 no. top
entry agitator will be provided in the tank. It will be
machined / fabricated
out of SS316 quality material. Wetted parts
shall be in SS 316
and non-wetted parts shall be in MS. It shall have
Upper& middle
impeller with bottom scrapper.
Agitator Drive 18.5 KW,
1470 rpm, TEFC working on 415 volts, 50 HZ 3 phase AC
supply. For Shaft
sealing single dry mechanical seal to be used.
Agitator Drive
Support Agitator
drive will be suitably supported on SS supports, complete
with stuffing box,
standard bearing housing, flexible coupling.
Nozzle & Fittings
Shell – 1 No. 450 MM
dia manhole
1 No. 100 mm Sight
glass
1 No. 100 mm light
glass
1 No. 51 mm liquid
inlet – SMS fitting
1 No. 25 mm sampling
cock
1 No. 76 mm bottom
drain with flush bottom valve
1 No. 50 mm CIP
nozzle with a spray ball 64 mm 2 nos
2 No. 25 mm level switch socket
No comments:
Post a Comment