Cooling Tower Specification

Cooling Tower Specification

Type : INDUCED DRAFT SQUARE COUNTER FLOW

Quantity / Number of Cells : 1 No.

Tower Size (LxWxH) : 3050 mm x 3050 mm x 3200 mm - PER CELL

FRP BASIN Size (LxWxH) : 3050 mm x 3050 mm x 250 mm - PER CELL

Shipping / Operating Weight : 1000 Kgs. / 3000 Kgs. - PER CELL

DESIGN PARAMETERS PER CELL

Water Flow Rate : 182 m3/hr

Inlet (HWT) : 37 °C

Outlet (CWT) : 32 °C

Delta T : 5 °C

Design Wet Bulb Temperature : 28 °C

Cooling Capacity : 9,10,000 Kcal/hr

Total Wetted Surface Area : 2034 m2

AUXILIARY EQUIPMENT PER CELL

Type of Fan : Axial Flow, DIRECT DRIVEN

Air Quantity / Fan : 24.2 m3/sec

Fan Diameter / Speed : 1800 mm / 720 RPM

Absorbed BKW at Fan Shaft : 5.9 kW

Electric Motor Rating : 7.5 kW / 10 HP / 750 RPM

Vertical Flange Mounted, Squirrel Cage

Weather Proof Induction Motor

suitable for supply of 415 V ± 6% 50 Hz ± 3%

with class of insulation “F” and IP-55 Degree of

Protection.

WATER LOSSES PER CELL

Evaporation Loss : 0.81 % of Circulating Water.

Drift Loss (Max.) : 0.005 % of Circulating Water.

Blow Down : 0.20 % of Circulating Water.

Make-up Water Quantity : 1.015 % of Circulating Water.

MATERIAL OF CONSTRUCTION

Casing / Basin : Seamless FRP (Panel Type)

Fills : PVC Honey Comb type Fills

Drift Eliminators : PVC

Nozzles : PP/ABS LOW PRESSURE DROP

NON CLOGGING TYPE

Water Distribution Headers : PP WITH FRP MOULDED. NON COROSSIVE

Fan Blades / Hub : FRP

Resting : MS HDG

PVC Fills Support/ Eliminators Support : FRP Pultruded

Fan-Motor mounting frame : MS-HDG